Amir Imanzadeh MD, Presenter: Nothing to Disclose

Frank John Rybicki MD, PhD, Abstract Co-Author: Research Grant, Toshiba Corporation

Dimitris Mitsouras PhD, Abstract Co-Author: Nothing to Disclose

Michael Lally Steigner MD, Abstract Co-Author: Speaker, Toshiba Corporation

Peter Constantine Liacouras PhD, Abstract Co-Author: Nothing to Disclose

Gerald Thomas Grant DMD, MS, Abstract Co-Author: Nothing to Disclose

Kanako Kunishima Kumamaru MD, PhD, Abstract Co-Author: Nothing to Disclose

Elizabeth George MD, Abstract Co-Author: Nothing to Disclose

Asha Sarma MD, Abstract Co-Author: Nothing to Disclose

Shanna Matalon MD, Abstract Co-Author: Nothing to Disclose

Tatiana Kelil MD, Abstract Co-Author: Nothing to Disclose

Catherine Phillips MD, Abstract Co-Author: Nothing to Disclose

Rani S. Sewatkar MBBS, Abstract Co-Author: Nothing to Disclose

Tianrun Cai MD, Abstract Co-Author: Nothing to Disclose

Meaghan Mackesy MD, Abstract Co-Author: Nothing to Disclose

Gregory Aaron Bonci MD, Abstract Co-Author: Nothing to Disclose

Sachin Shyamsunder Saboo FRCR, MD, Abstract Co-Author: Nothing to Disclose

1.Introduction of 3D printing methods 2.Discuss imaging pre-requisites and post-processing techniques for obtaining printable files (STL outputs) 3.Re-meshing techniques and preparing the STL files for printing 4.Overview of current clinical applications of 3D printing 5.Discuss potential utilizations and future directive

1.Techniques of 3D printing: Description of different technologies, printers , and materials used in 3D printing 2.Imaging pre-requisites: Discuss the imaging modalities, requirements, and protocols 3.Post-processing and segmentation: Software introduction and utilization 4.STL files: Rendering and Re-meshing 5.3D visualization vs. 3D printing 6.Overview of current medical Applications: a. Maxillofacial surgeries b. Reconstructive surgeries c. Implants d. Orthopedics surgeries e. Education 7.Future applications: Organ and soft tissue printing

http://abstract.rsna.org/uploads/2014/14018604/14018604_z1zd.pdf

Imanzadeh, A, Rybicki, F, Mitsouras, D, Steigner, M, Liacouras, P, Grant, G, Kumamaru, K, George, E, Sarma, A, Matalon, S, Kelil, T, Phillips, C, Sewatkar, R, Cai, T, Mackesy, M, Bonci, G, Saboo, S, Fundamentals and Applications of 3D Printing in Medicine.  Radiological Society of North America 2014 Scientific Assembly and Annual Meeting, - ,Chicago IL. http://archive.rsna.org/2014/14018604.html